Archive by Author

Refurbishing a vintage rock guard

3 Jul

wire brush on frame

Replacing a vintage rock guard can be expensive, one alternative is to fix it yourself. Our vintage Airstreams rock guard was missing it’s glass. We thought of a few ideas including fiberglass, inserting our own plastic, the cardboard/duck tape route, and just not having a rock guard. We finally settled on trying to refurbish it ourselves, as buying a new rock guard was very expensive, and we are saving up money for our AC unit.

originial vintage airstream rock guard

Rock Guard against truck

The rubber gasket was falling off and had become a home for a local tribe of ants. Removing the gasket was definitely gross, I cut the bottom and ants came spewing out.

ants in gasket

Ants up close

I then decided it was time to put on my gloves, and rip the remainder off. The frame itself was covered in rust, moss, pollen, mold and tree debris. I used a fine wire wheel brush on my drill to get through the rust, and then went over it with a steel wool pad. Soapy water, a sponge, and an old dishwashing brush helped to get the debris out of the smaller grooves.

Kaitlin holding drill


before and after



Our initial idea was to polish the rock guard and get a new window put in it. After I shined the rock guard up, I loaded her in my truck with high hopes and smiles. To my dismay- I was turned down 5X in a row by local custom glass businesses! Ouch! Easier said than done. Apparently the glass places I’ve been to cannot make a slab of tinted plexi or lexan with a bend in it. Because the rock guard is curved, they say it is impossible to fit glass to the frame.

Finally, we came across Full Service Glass, and they helped us retrofit some clear plexi in our frame for the fraction of the cost of a new rockguard. Afterwards, we replaced the window gasket using 3M Gasket Adhesive and some D gasket that we found online (I’d rather not share the gasket retailer since we had a bad ordering experience.) In the future we may do a blogpost on gasket removal/installation DIY post, it’s fairly simple, just tedious as with all parts of this reno.

After the gasket is glued, you just have to wait for it to dry, and slide the rock guard back into place. If you are wondering how to remove or replace the rock guard, check out this video from our sponsors at Out-of-Doors Mart.

Hope everyone is enjoying their summer!

Join us at the 68th Annual Greater Manassas Christmas Parade on December 7th!

5 Dec



100 lucky parade goers will receive limited edition SilverSistas tee shirts shown below.

…Keep reading this post…

DIY – Installing plastic window guides

24 Jun


We would like to share our tips & tricks for installing window guides on a vintage Airstream. Our 1969 Airstream’s window guides were in bad shape and desperately needed a facelift. They were cracked, squished, and yellowing from old age, making it hard to open and close our windows.

Keep reading this post…

Inspirational Quotes

28 Apr

Airstream tail plate

Here are a few quotes I’ve gathered along the way from fellow users on AirForums …Good to read when you need a little encouragement to get some work done!

…Keep reading this post…

Warm wishes from your favorite sistas…

22 Dec

Merry Christmas and a Happy New Year!

Erin and I wanted to take this moment to wish everyone a Merry Christmas and Happy New Year! We are so fortunate to have a loving family, a roof over our heads, the support of our sponsors, and a growing fan base of trailer enthusiasts. With that being said, we are feeling energized and are ready for all the challenges the new year has to bring.

…Keep reading this post…

It could always be worse…

8 Oct

photo-12 copy

…At least, that’s what we keep telling ourselves. Our plans were rolling quite smoothly at first. In the days leading up to our annual trip to Upper Michigan we were to install new LED lights, rewire the brakes, and replace the old sub floor with Nyloboard and then we were ready for our voyage. Easy right?!…

…Keep reading this post…